Here's another article from my BASS newsletter :study:



There's a lot more to fishing spinnerbaits than meets the eye

By Mike Pehanich
BASSMASTER Magazine, April 2008



Everyone loves the spinnerbait.


"It's the most versatile bait of all," angling legend Bill Dance told his television audience recently. "It's the lure a fisherman should master, for sure, because it can be fished at so many different depths and so many conditions & all 12 months of the year."

I switched channels and heard much the same.

"It's the most popular lure type out there," echoed Rick Clunn, voted No. 1 in Bassmaster's Greatest Angler Debate.

And it's a bait that loves right back — a veritable Will Rogers of the ol' tacklebox that never knew a bass fisherman it didn't like ... or, at least, couldn't charm.

Its beauty lies in its perceived simplicity. Cast it. Retrieve it. Watch it flash.

And, on a good day, it seems you cannot fish it wrong.

But this brightest of baits has its dark side, too. A spinnerbait can frustrate an angler with its tendency to produce short hits or to simply go ice cold. If you want to maximize your success and minimize your frustration, take the spinnerbait off your "no-brainer bait" list and recognize it as a sophisticated piece of hardware, a three-way hybrid of blade, fly and jig that you must fine-tune for optimum performance.

BLADE NIPPERS

The bass on Lake Guntersville are aggressive, says Tim Chandler, a prominent guide on the Alabama impoundment renowned for its spinnerbait bite. He thinks Guntersville's vast acreage of hydrilla and milfoil and a belt-busting forage base of shad and bluegill make the lake's bass aggressive.

Bass positioned in the grass are looking up, Chandler explains. "They're just waiting for something to come by so they can ambush it." A flashing spinnerbait brings out their aggression.

Yet short hits are common even among Guntersville's gluttonous bass stock. What gives?

"When bass hit short on a spinnerbait, they are often hitting the blade and not the hook," says Chandler, who often prefers a Booyah Double Willow Blade with paired gold and nickel-plated blades or a Tandem (willow with small Colorado) combination.

Chandler adjusts his bait to the short strikes. "My first thought is to bend the spinnerbait down to get the hook closer to the blade," he says. "Sometimes I add a trailer hook so I have two hooks close to the blade. If they are hitting the blade, it may be a sign that I need to change the skirt, as well — either make it more attractive or change it altogether."

SKIRT SCIENCE

The skirt talk led me to Guido Hibdon, an inveterate tinkerer. Guido and son Dion have turned skirt selection on spinnerbaits and jigs into both art and science.

Bass generally hit a spinnerbait because they perceive it as a baitfish or something moving past them really fast. Though a spinnerbait may draw a reaction strike, the degree to which the bait resembles the real deal may determine the fish's degree of commitment — whether the bass inhales the bait or just nips at the filaments of plastic.

"The blade is an attractant," explains Hibdon. "But you need the right colors to get the bass to eat it. ... It usually comes back to the skirt."

The Hibdons designed a series of skirt-making kits for Skirts Plus of Savage, Minn., called Hibdon's Classic Kits, with complete materials and tools for making jig and spinnerbait skirts.

Skirt selection is a process based on water color and preferred forage. Hibdon generally selects dark natural colors in dark water; brighter colors (with whites and flash) in clear water; firetiger in stained water and most Florida waters; and "pearl white and pink for any place up north that has smallmouth."

When he suspects bass are feeding on a select forage species, Hibdon attempts to match the hatch, mixing skirt materials to get a combination that will mimic the baitfish's appearance.

"You can match anything," he says. "For a golden shiner, it's gold on the side with pearl white. Match a blueback herring with a dark olive back and a couple of strips of pearl white down the side and two tiny strips of red for the belly."

BLADE MAGIC

A spinnerbait appeals powerfully not only to a bass' sense of sight but to the sensations of sound and vibration, too. Blade types and blade positioning help tap into a bass' rhythm.

Aim at optimizing the mix of flash and water displacement that conditions demand.

Bright, clear water conditions may call for more flash. Dark conditions may call for more vibration. The more rounded Colorado blade gives out more thump but less flash; the long, narrow willowleaf blades turn faster and displace less water, giving off more flash than vibration. In between lies the Indiana blade, a compromise selection.

Large blades and multiple-blade designs deliver more flash and more vibration, but they also displace more water, making fast or deeper retrieves more difficult.

To get more functionality out of multibladed baits, some manufacturers offer combinations of different sized blades and willow/Colorado combos. Keep in mind, however, that every choice or modification has a trade-off.


SLOW ROLL ADJUSTMENT

At times, nothing beats a slow rolled spinnerbait. Pickwick Lake guide and bass pro Roger Stegall finds the tactic particularly deadly on his home lake in late spring, executing the retrieve with three to four cranks followed by a pause.

First, however, he modifies a 3/4-ounce Strike King Premier Pro-Model by clipping off the beads and clevis and the small blade, leaving a single No. 5 willow blade and small red bead as an attractor.

"It gives me more thump and vibration, and fish key in on it better," says Stegall.

"Without the little blade up front, it turns more water."

ROLLING THROUGH THE GRASS

The spinnerbait's versatility rests largely on its ability to maneuver through cover, including moderately thick vegetation.

Guide Troy Jens prefers a steady retrieve through the tops of the emerging hydrilla and milfoil beds on Lake Guntersville in the spring.

"I like a steady cadence. I don't like to jerk it along," says Jens. "I pull only when I have to get the bait unhung."

Elite Series pro Zell Rowland also goes steady in the grass. "You want to make your spinnerbait look as realistic as possible in vegetation," he says. "If you're fishing a brushpile, on the other hand, you will want to bounce it off and give it an erratic action. But not in the green growth."

BURN TREATMENT

Sometimes you have to go to the other end of the retrieve spectrum and "burn, baby, burn."



Fast-track northern smallmouth in particular can be suckers for a speedy spinnerbait, especially when it's dressed with a skirt of pearl white and pink or solid chartreuse with a neon-black back, Hibdon notes.

The ground rules are to use 1/2-ounce to 1-ounce baits with downsized blades to keep the bait down during the retrieve.

Hibdon prefers a No. 3 or No. 3.5 willow on the arm and a No. 4 or No. 4.5 willow off the swivel. "For smallmouth, throw it on braided line and burn it back, a real high-speed beat. It won't get back to the boat."

TRAILER TALK

Neither Jens nor Rowland employs a trailer hook when working a spinnerbait through vegetation. "It's another hook to snag," says Rowland.

Makes sense, but trailer talk evokes strong differences of opinion.

"I always use a trailer hook, especially around grass or when I'm ripping a bait on windy points in open water because the fish may be slashing," says former Elite Series pro Jimmy Mason. "I remember something that Hank Parker said that always made sense: When you use a trailer, you subconsciously don't throw it into the heavy cover. It mentally forces you to work the edges."

Mason employs a slow 5:1 Quantum PT or Ardent reel with 17-pound Silver Thread AN40 or 14-pound Silver Thread fluorocarbon when he is working deeper water.

When his bait encounters grass, he does not rip it free.

"I just let the rod load up when it hits vegetation," says Mason. "The stiff rod (Kistler 6-9 medium-heavy) will pop it free by itself."

Elite pro Terry Butcher says most of the bass he caught on a spinnerbait at the Southern Challenge on Lake Guntersville last April hit the trailer hook. He didn't miss a fish on his way to a third-place finish.



"Most of the time, you don't feel the bite. The rod just loads up," he says. "To me, that is the key reason for using a trailer. I think a bass has a tougher time sucking a spinnerbait in when stationed in the grass. When fish are just slapping at a spinnerbait, the trailer often gets them."

Butcher holds his trailer in a horizontal position with the use of a piece of red tubing, noting that the red "adds a little color" to his bait, as well.

Employing a red trailer hook may be an added attractant.

"I always add a bleeding bait trailer hook unless I'm around cover," says Tommy Jacques, pro angler from Wetumpka, Ala. "When a fish goes to feed, you will see its gills flare up. With the skirt around the hook, it gives just a flash of red, like gills flaring."

And you guys give me crap for having so many different spinnerbaits. Now you know why :tongue:

Good reads B!

Thanks for posting. I was thinking of adding the 75 frog tips also. ;) Maybe in a week or so.


SHUT UP DAVE!!!!!! Only problem that you have in OCD! :tongue:

thanks for posting this. it was a good read.

I love me a spinnerbait, I will admit that. My issue that I have noticed over the past 4 years is it seems in ponds, that it is a lure that the bass shy away from quickly. Not sure what it is but my spinnerbait catching has decreased probably 4 or 5 fold in the past 2 years. The only thing I can attirbute that to is the bass getting wise to them.

interesting observations guys. I'm thinking this may apply to Brushy also..heavily pressured from tourneys and wed night bass leagues and then regular anglers. maybe thinking outside the box as far as baits go at Brushy may be the ticket later this spring :clap: